Archive for the ‘Guest Posts’ Category

Today’s guest post comes from Jasmine Smith, a book carver. What is that, you ask? Read on.


I have always found inspiration and motivation in books, but that message is gathered over hundreds of pages and hours of time. As an artist, I began to consider whether a book could motivate a reader in just one glance, communicate a theme in just seconds. And so I started carving words into books, the carved words supported by the original text. I try to marry together my message and the book’s original purpose or intention to create pieces that are both inspirational and beautiful.

My first adventure in book carving was called Scribo Ergo Sum: “I write, therefore, I am.” Despite Descartes’ assertion, I believe that thinking cannot function alone, but needs to be spread and communicated in order to be truly effective. Dictionaries seemed like the perfect canvas for this message, especially because I had the opportunity to turn a stack of unwanted books set aside for recycling into works of art.

[“Scribo Ergo Sum” – The Page Smith, 2010, Altered Books]

“Scribo Ergo Sum” – The Page Smith, 2010, Altered Books

I’m still using carved books to challenge my viewers to take intellectual risks. I have encouraged the viewer to innovate and capture his or her own creativity. In Icarus Survives I explore the process of assessing failures while still recognizing worth and enormous potential. I hope that my books ignite self-reflection, critical thinking, communication, and a spread of creativity!

[“Icarus Survives” –The Page Smith, 2012, Altered Book]

“Icarus Survives” –The Page Smith, 2012, Altered Book

[“Western Dreams (Innovate)” – The Page Smith, 2012, Altered Book]

“Western Dreams (Innovate)” – The Page Smith, 2012, Altered Book

Thanks to Real Life Artist for her enthusiasm for art with a purpose! Check out more of my work at thepagesmith.wix.com/books.


Read Full Post »

All artists can become a little blocked. Here are five videos that will inspire and entertain you, and maybe even spark your creative flare.

1. JR’s TED Prize Wish: Use Art to Turn the World Inside Out
JR, a semi-anonymous French street artist, takes the audience on a journey through his guerrilla artwork and the history behind his illegal exhibitions and his engagement with all kinds of communities. He then tackles the question, “could art change the world?” As the winner of the TED Prize Wish, JR asks everyone to turn the world inside out through art.

2. Ravin Agrawal: 10 Young Indian Artists to Watch
Collector Ravin Agrawal delivers a brief overview of 10 exciting contemporary artists working in India. The artists use an array of media and draw on their local culture for inspiration.

3. Vik Muniz: Art with Wire, Sugar, Chocolate, and String
Artist Vik Muniz shares his charming take on the world and the different media he uses in his work. Full of humor and sharp intellect, Muniz’s exploration through texture and media is a working experiment of art and perception.

4. Marco Tempest: The Magic of Truth and Lies
For anyone who has pondered the relationship between art and deception, this video is a must-watch. Using iPods, video, and a few magic tricks, Tempest discusses the nature of deception in society and how it relates to art… and to magic.

5. Denis Dutton: A Darwinian Theory of Beauty
Denis Dutton takes his audience through an animated journey throughout time and across cultures to explain the intellectual and philosophical explanation of a theory of beauty that dates back to our prehistoric ancestors.


This guest post comes from Rachel, an artist who writes for webdesignschoolsguide.com. When she’s not writing, you can find her covered in paint or cheering up the neighborhood with sidewalk art.

Read Full Post »

Courtesy of Mr. Brian Powers, guest blogger extraordinaire…


Read Full Post »

This is the fourth installment of a series by Brian Powers. To catch up, see these:


Math, Art, and Game Design

A Series by Brian Powers

Part 4: The Initial Play Test

Game Design is a bit of a paradoxical form of art. Games are by their very nature social, yet the game design process can be quite a solitary activity. I’d bet most game designers get into this mess because they love playing games, yet they may spend ten times as long (maybe more!) in design mode as they do actually playing the games they design. But we eventually come to the moment: the first time we bring other people into the processand hopefully bring some joy into their otherwise miserable lives.

Well, that’s an exaggeration, but I wouldn’t be lying if I said that play testing is my favorite part of the game development process. Ideally, when creating a new game, you’ll want to test the game yourself before bringing other people into the mix. This is when having dissociative identity disorder comes in really handy, because you have to jump from chair to chair, taking the turn of each player and trying to see things from his/her hypothetical point of view. Unfortunately I couldn’t do this with my game because at its core lie the decisions that players Red and Blue make (without knowledge of each other’s decisions). I needed some actual human beings. Fortunately, I know some of them!

Five of my friends came over this past Sunday afternoon and I showed them what I had been working on. After explaining the rules and the goal of the game, we played six rounds. How did it go?

Let me first go over the rules with you:

We set up the game board with a random assortment of red, blue, and green stones:

We next laid out the Reward Action cards and Modify Action cards, in this way (there are a few more Reward and Modify actions that I haven’t included here, but you should get the idea):

Reward Actions


Make Red XO decision and receive red reward


Make Blue XO decision and receive blue reward


Receive green reward


Take 1 point from each player who chooses “X”


Receive 2 points for O or O, 5 points if both are played


Take 1 point from a player of your choice

Modify Actions

Add 2 stones of any color(s) to the board

Remove any 2 stones from the board

Move 2 stones on the board

Add 1 stone of each color to the board

Remove 1 stone of each color from the board

Swap the positions of 2 stones on the board

To begin, one player is given the “Round Leader” card. This just symbolizes which player gets to choose first during the first round of the game. This card is passed clockwise after each round.

Then, starting with the Round Leader and continuing clockwise twice around the table, each player chooses and takes an action card from the table. Thus, each player gets to take two action cards. Each player must choose one Modify action and one Reward action, and the Red and Blue actions must be taken. So if all but two players have chosen their Reward actions and Red and Blue remain on the table, the last two players are forced to take these two cards.

After each player has two action cards, players exercise their Modify actions, beginning with the Round Leader and following clockwise. You can imagine that, at this point, players each have their own agendas, and they will hopefully be able to modify the board to set things up for themselves to receive a lot of points.

Finally, the two players who chose the Red and Blue actions each get a pair of cards, one with an “X” and one with an “O” (both in their respective color) which allows them each to secretly choose one. They simultaneously reveal their choices and points are awarded. Thus ends a round of the game!

Overall this was a tremendously fun experience for all of us. I was pleasantly surprised how quickly everybody got into the game, how easily they understood the rules – and yet the game was anything but simple. We felt like Fezzini and the Man in Black locked in a battle of wits.

This is exactly what I was going for, and to say I was pleased is putting it lightly.

We played for six rounds, like I said, because it became clear that certain aspects of the game weren’t quite balanced. For example, the “Thief” action allowed a player to take one point from an opponent, but this ended up being pretty weak compared to the other Reward actions. And the “neutral” Green player worked out well too, although I want to balance out the number of green stones on the board so they are more on-par with Red and Blue. Also, I realized that for six players I would want at least eight Modify and Reward actions, so that there are both more options and more opportunities for incentive points.

I would like to mention that, although I have successfully tackled the challenge of making the game fun for more than two players, this has opened up a new problem. Because it was so fun with a group of six, I’m not sure how to capture that same sense of strategy with only two players. We’ll see how this goes.

OK, so, enough about that. My next step is to do more testing! Tweak a few things and play with a new group of people. Test and tweak, test and tweak. This cycle will continue until I get a polished game design that doesn’t need any more changes. Along the way I will, ideally, bring this game to a board game Meetup here in Chicago and have some strangers play while I watch. This is an important step, especially to see how well I’ve written the instructions! I can also give them feedback questionnaires! Ooh, I’m getting all tingly just thinking about it.

I’ll try to get some more testing done soon so that I can come back with my next installment. It may be a few weeks, but I’ll be back as soon as possible, fellow artists! As Chloë would say: “Huzzah!”

(But I would never say that. Not ever.)

P.S. I would also like to mention that I lost pretty miserably. Of the six of us, I came in last with about 9 points.


Brian will be back with another installment later. Until then, cheerio!

Read Full Post »

This is the third installment of a series by Brian Powers. To catch up, see these:


Math, Art, and Game Design

A Series by Brian Powers

Part 3: The Playable Prototype

During each stage of the game development process it is key to keep perspective of what the short term goal is. Here’s a map of how to get from zero to a finished game:

  1. Concept: Figure out what the game is about.
  2. Game Design: How is the game played? What are the rules (game components, goal of the game, etc)?
  3. Initial Prototype: Make a playable rough draft of the game.
  4. Play-testing: Test out the game to see what works and what doesn’t work. Make changes accordingly. (Repeat this step until you don’t need to make changes anymore.)
  5. Publish: Either self-publish or get a publisher to buy your game from you!

An elaboration of the process can be found at the Board Game Designer’s Forum (a fantastic resource for board and card game designers!)

As tempting as it may be to start illustrating the game or adding color (in the general aesthetic sense, not in the purely literal sense), we don’t want to get ahead of ourselves. Right now we need to make a very basic playable prototype. We want to make sure that the game works before we invest time into illustrating it and making it pretty. The prototype doesn’t need to look great; we want to get to the first play test and find out what about the game design is fun and what is clunky and needs to be tweaked or fixed—that is, what ambiguities we didn’t foresee and need to delineate. Moreover, we face the truth: does the game work or is it a dud?

Some games will be duds! Not every game idea we have will be brilliant, and that’s OK. But you need to create and get practice. The more you do that, the more easily you’ll be able to visualize the end in the beginning, to identify a great game concept when it comes.

So let’s make a prototype! My game is pretty simple and doesn’t rely on a lot of fancy game parts, but, even if you imagine a game with bells and whistles, making a prototype is quite doable and shouldn’t cost you much time or money. Here are some of the essentials for a game developer:

Blank Cards

You can use index cards if you want to keep things super simple. If you want your cards to be a little more durable and easier to handle and shuffle, you can buy blank playing cards. At the moment, you can get a box of 500 blank playing cards from Amazon for $7.20 (USD).

In my opinion, this is a must-have for a game designer. Index cards are OK, but to really enjoy the play-testing, you will want cards that feel good to manipulate. You can write with pencil or permanent marker on these cards, and they will get the job done!

Game Boards

You can get some stiff whiteboard from your local craft store and cut it down to size. If you don’t care too much about thickness, however, card stock or even paper will do fine.


You can probably get by with the average 6-sided die, but you may develop a game that uses dice with 4, 8, 10, 12, or 20 sides. You can buy dice for pretty cheap at game stores or from many online shops. At my local dollar store, they sell a pack of 10 dice (5 white and 5 colored) for $1.

Counters, tokens, money, pawns

For the prototype you can use pretty much anything for game parts, but if you’ll be developing a lot of prototypes, it might be worthwhile to have a little library of game parts. You can buy these from a store like The Game Crafter, if you want them to be fancy, but game parts can be found on the cheap, too! I needed colored tokens, so I went down to Michael’s Arts and Crafts for some bags of rainbow glass gems (they were on sale for $1 per bag!).

Another great option is to buy a big container of colored cubes. Colorful, 1cm cubes are are sold as learning resources to teachers, but they are great as game counters, tokens or whatever (you can do a Google shopping search for “centimeter cubes”). Plastic discs are also sold to teachers as learning aids, and they make great counters or coins and can be used to score points. Translucent and opaque are easily found online.

It didn’t take long to make my prototype. Rather than explaining how I did it, I’ll just show you a photo:

I wanted to keep things super simple for the prototype. I have two sets of Action cards; the top set are the modification actions, which allow players to modify the rewards shown on the game board. The second set are the reward actions, which are how players get points.

Then there are the strategy action cards, a set of X and O for both Blue and Red. (You’ll notice that I used O and X rather than “passive” and “aggressive” – terms I used in my last two posts to describe the players’ action options in my game). These cards allow the Red and Blue players to secretly choose an action and then reveal it simultaneously. Lastly there is a deck of game-board setups for Red/Blue and one for Green, and finally a “Round Leader” card, which is passed around the table to each player so that different people have the opportunity to pick their actions first.

I just needed a few Sharpie pens to put this together. I didn’t do anything with the card backs. You can see how simple it is. Yet this is all I needed to get my friends together and test the game out.

Tune in next time to see how the first play test went and what I learned! [Here it is.]


[Editor’s note: how funny that I tweeted about this post and noticed a tweet, shortly afterward, from a friend whose friend is making another board game—about pizza and dexterity—and trying to fund it on Kickstarter. He’s almost at his goal, and there are only a couple of days left to help out! If your interested, check it out: Top This! on Kickstarter. See you next time!]

Read Full Post »

Older Posts »